---
title: Tyre Speed Rating and Load Index Explained for UAE Drivers
url: https://saeedipro.com/blogs/tyre-speed-rating-load-index-uae/
published: 2026-11-22T09:16:51+00:00
modified: 2026-11-22T09:17:03+00:00
author: Saeedi Pro
post_type: post
categories: [Tyres]
featured_image: https://saeedipro.com/wp-content/uploads/2026/11/tyre-speed-rating-load-index-uae.jpg
word_count: 1260
reading_time_minutes: 7
---

# Tyre Speed Rating and Load Index Explained for UAE Drivers

Look closely at any tyre and you will see a short code after the size, something like 91V or 100W. Those few characters tell you how much weight the tyre can carry and how fast it can safely go.

At [Saeedi Pro](https://saeedipro.com/) we check these markings on every car that comes in. Here is how to read the tyre speed rating and load index, and why they matter on fast UAE roads in summer.

**Quick Answer:** A tyre speed rating is the letter at the end of the size code showing the maximum speed the tyre can sustain at its rated load, for example V for 240 km/h. The number before it is the load index, the maximum weight per tyre. Always fit at least the ratings your car maker specifies.

**Key Takeaways**

- The size code ends with a load index (a number) and a speed rating (a letter).

- The speed rating is linked to the load index, so the two work together.

- Your car&#8217;s required ratings are in the owner&#8217;s manual or on the door sticker.

- Never fit a lower speed rating or load index than your car maker specifies.

## How do you read the markings on a tyre&#8217;s sidewall?

Take a typical size such as 205/55R16 91V. As the UK tyre safety charity TyreSafe explains in its guide to [tyre sidewall markings](https://www.tyresafe.org/tyre-advice/tyre-markings/car-tyre-load-and-speed-markings/), 205 is the width in millimetres, 55 is the sidewall height as a percentage of that width, R means radial construction and 16 is the rim diameter in inches.

The last part, 91V, is the service description. The 91 is the load index and the V is the speed rating. If you are thinking of changing wheel or tyre sizes, read our guide to [buying car tyres](https://saeedipro.com/everything-need-know-buying-car-tyres/) first, because the load and speed ratings have to stay suitable for your car.

## What does a tyre speed rating mean?

The speed rating is the maximum speed a tyre can sustain while carrying the load shown by its load index. TyreSafe&#8217;s [tyre speed ratings explained](https://www.tyresafe.org/tyre-advice/tyre-markings/tyre-speed-ratings-explained/) page notes that it does not reflect legal road speed limits, which are much lower. It is a measure of what the tyre is built to handle.

That matters because a tyre running near its limits generates heat. A tyre with a higher rating is built to cope with that stress, which is why performance cars are usually specified with high ratings such as V, W or Y. NEXEN Tire&#8217;s N&#8217;Fera range is a good example: it is NEXEN Tire&#8217;s performance line, and the N&#8217;Fera SUR4G is designed for sports cars, sports coupes and performance saloons.

## What does the tyre speed rating chart look like?

These are the ratings you are most likely to see on cars in the UAE. The figures below match the published charts from TyreSafe and Michelin.

Speed rating
Maximum speed
Typically found on

S
180 km/h
Some everyday cars and light SUVs

T
190 km/h
Everyday cars and SUVs

H
210 km/h
Many family saloons

V
240 km/h
Sportier saloons and premium cars

W
270 km/h
[Performance cars](https://saeedipro.com/tyre-solutions/car-tyres/)

Y
300 km/h
High-performance and luxury cars

Note that the letters are not fully alphabetical: H sits between U and V. Always check the number in the chart rather than guessing from the letter.

## What is a tyre load index?

The tyre load index is a number that stands for the maximum weight a single tyre can carry when correctly inflated. Michelin&#8217;s [guide to tyre load and speed ratings](https://middle-east.michelin.com/auto/advice/tyre-basics/tyre-load-rating-speed-rating) lists the values, a few of which are shown here.

Load index
Maximum load per tyre

88
560 kg

91
615 kg

94
670 kg

100
800 kg

104
900 kg

112
1,120 kg

Large SUVs and 4x4s that carry families, luggage or a trailer often need higher load indexes, so this number matters just as much as the speed rating. NEXEN Tire&#8217;s Roadian range is built for SUVs and 4x4s, and we match the load index to your vehicle.

## Why is fitting a lower rating unsafe, especially in UAE heat?

TyreSafe strongly recommends fitting tyres with a speed capability and load index at least equal to those the car maker originally specified, and advises against mixing different speed ratings on one car. [Michelin](https://saeedipro.com/best-tyre-brand/buy-michelin-tyres/) says you should never fit a lower speed rating except for winter tyres, which is not a concern in the UAE.

A lower-priced, lower rated tyre may look like a saving, but it leaves less margin for the heat and stress of long, fast highway drives in summer. On luxury and performance cars, where speeds and weights are higher, that margin is even more important. This is where NEXEN Tire&#8217;s experience counts: it supplies original equipment tyres to Porsche, BMW, Audi and Mercedes-Benz.

**Buy 4 tyres, get 4 services free**
Here is something worth knowing as a car owner. Every set of four tyres at Saeedi Pro comes with four services included at no extra cost: wheel balancing, wheel alignment, tyre rotation and nitrogen filling. That matters because a tyre is only as good as the way it is fitted and set up, and those four jobs are exactly what make a new tyre last and stay safe in the heat. It applies to every tyre brand we stock. You can see the current deals on our [tyre offers page](https://saeedipro.com/tyres-special-offers-and-best-deals-in-dubai/).

## Looking for performance tyres near you?

If your car needs a high speed rating or a heavy load index, it pays to choose from a range built for it. Our [high-performance tyres](https://saeedipro.com/tyre-solutions/high-performance-tyres/) cover V, W and Y rated sizes, and for most performance cars we recommend [NEXEN Tire N&#8217;Fera](https://saeedipro.com/tyre-solutions/high-performance-tyres/nexen-nfera/) from our wider range of [NEXEN Tire tyres](https://saeedipro.com/best-tyre-brand/buy-nexen-tires-in-dubai/). Drop into one of our [branches](https://saeedipro.com/locations/) and we will check your current markings against your car&#8217;s specification.

Not sure which speed rating and load index your car needs? Tell us your make and model. The easiest way is to call us on [800 72 3334](tel:800723334) or send a message on [WhatsApp](https://wa.me/+971529033041/?text=Hi,+could+you+help+me+with+a+quote?), and one of our team will sort it out for you.

## Frequently Asked Questions

### Q: Where do I find the speed rating on my tyre?

It is the letter at the very end of the size code on the sidewall, straight after the load index. In 205/55R16 91V, the speed rating is V, which means a maximum of 240 km/h at the tyre&#8217;s rated load. Your car&#8217;s required rating is in the manual or on the door sticker.

### Q: Can I fit a tyre with a higher speed rating than my car needs?

Yes, fitting a higher speed rating than your car maker specifies is generally fine, as long as the size and load index are also correct. What you should avoid is going lower. Ask us to confirm the tyre suits your car before fitting it.

### Q: What happens if my tyre load index is too low?

A tyre with a load index below your car&#8217;s requirement is not designed for the weight it is carrying. That puts extra stress on the tyre, especially when the car is fully loaded in summer heat. Always match or exceed the load index your car maker specifies.

### Q: Which tyres do you recommend for a performance car?

For most performance cars we recommend NEXEN Tire N&#8217;Fera, the performance line from a brand that supplies original equipment tyres to Porsche, BMW and Audi. We fit it in the size, load index and speed rating your car maker specifies, so you keep the full safety margin.

### Q: Can I mix tyres with different speed ratings?

It is best not to. TyreSafe advises against mixing speed ratings on the same car, because tyres with different ratings can behave differently. If you replace one or two tyres, match the existing rating, and ideally the brand and pattern too.